Rotary Paving ™ Moulds

The whole range of these moulds are available in either our Rivenstone or York Flagstone patterns. Moulds No. 9, 15 and 16 are also available (Polyurethane mould) in Pebble pattern. This unique and very versatile paving system can be used to make a huge variety of differently shaped paved areas including circular, semi circular and quadrant shaped patios up to 3.9 metres in diameter. Winding paths can easily be constructed in a variety of widths and this paving system can also be used for pond surrounds, bow fronted patios and many other projects. Shown below are some of the most popular layouts.

1.8 metre circle constructed by using pavers 1, 2 and 3. The circle is squared off by using pavers 6, 7 and 8 and then set within a patio of 450mm x 450mm paving stones.

3.9 metre diameter patio constructed by using pavers 1, 2, 3, 4 and 5. By reducing the number of 'Rings', circles can be constructed in the following diameters: 3.0m, 1.8m, 0.9m and 0.45m.

3.0 metre diameter patio incorporating our very popular 1.8m 'Sunrise' centre feature. This complete patio is constructed using only four different shaped pavers, 4, 9, 15 and 16. The No. 9 centre circle can be used to replace the four No. 1's shown in the previous illustrations and can also be used as a 450mm diameter stepping stone.

3.0 metre circle constructed by using pavers 1, 2, 3, and 4. The circle is squared off by using pavers 10, 11, 12, 13 and 14 and can then be set within a patio of 450mm x 450mm paving stones if required.

600mm wide winding path constructed using No. 4 Rotary pavers. Many other path widths can be constructed from the Rotary range.

Rivenstone No.4 Rotary paver

York Flagstone No.4 Rotary paver

Pebble No.16 Rotary paver
(Polyurethane mould)

Pebble No. 15 Rotary paver
(Polyurethane mould)

17 piece 1.8 metre 'Sunrise' centre feature.

Telephone: 01480 404445